Capra Blank Flat Skid (Free Shipping)
Precision machined from Delrin with high quality finish resembling aluminum.
Top of Skid is double counter sunk for the transmission and motor for ultra-low CG.
Super flat bottom with angled approach and descent.
Precision threaded side holes for easy install and durability.
Oversized link screw holes that change to M3 thread at the center of the skid for ease of build and time conservation.
Aircraft quality aluminum, black anodized link mounting brackets.
Link mounting brackets have been designed to also fit long motor cans, such as the HobbyWing Fusion Pro.
Please Read Carefully: This Skid is for custom builds; there are no holes for mounting transmissions. The Skid is intentionally flat in order to allow the builder to choose the transmission they desire to use and make work. Rock Pirates RC has machined reference lines into the top of the Skid to provide the builder a visual of where the link screws and Skid mounting screws are located. Stay out of these areas when locating your transmission and drilling any holes. We have also marked the top of the Skid so the Builder can easily identify the Front (F) and the Rear (R) of the Skid.
The Rock Pirates RC Capra Blank Flat Skid was designed to make the Capra to Rock Pirates RC Interceptor Chassis conversion simple. The link mounting brackets are included.
Important Information: The RPRC Flat Skid WILL fit the Stock Capra Chassis. When installing be sure to leave all the screws loose until they are all started, then tighten. The Skid has precision threads, all the screws will install effortlessly when aligned correctly, be sure not to cross thread when installing.
The 4 holes of the link mounting brackets go to the front of the Skid.
Made In USA
Notes: Be sure to have a good set of M3 screws and M3 Nylocks before tackling this type of build.
Be sure to install the lower links into the Skid before mounting the chassis rails.
Caution, if you feel the side screws bottom out before getting tight, use a shorter screw.