Winch Guide Crossmembers

The Rock Pirates RC Flat Rail Crossmembers with Winch Cable Guide Holes were designed to provide a simple and clean way to route the winch line on crawlers that have the winch servo mounted back from the front of the rig. The Crossmembers have 3 beveled holes for smooth cable passage and routing options. 

3 Crossmembers Per Pack!

Fits the Rum Runner and Axial Pro Perfect! 

The Winch Guide Crossmembers are the same width as the RPRC Standard 4 pack Crossmembers and provide additional cross support for flat rail chassis and shock tower support on C Channels chassis outfitted with Rock Pirates RC shock towers. The Crossmembers are precision machined out of aluminum with M3 threads on both ends and are light weight. Shocks can be screwed directly into the Crossmembers if needed.  

Important Information: Crossmembers are 2 15/16 inches in length, the same as the RPRC X-Mount and is the perfect length for most Interceptor builds. This length also spaces the Interceptor Chassis wide enough to allow the RPRC Hardline Bed to fit between the frame rails. The length also fits shock towers of SCX10-2 and Elements outfitted with RPRC shock towers.

Note: The Crossmembers Can Not be used on the front of Interceptor builds that use the RPRC or Factory SCX10-2 or Element servo trays, they are too wide for this application.

 Made In USA